From: ÖÜêÇêÀ (malrot13_at_gmail.com)
Date: Tue Dec 10 2013 - 06:51:31 CST
Your suggestion is very helpful. We are looking for some "better scale"
switch. But here comes another question: what feature represent the
"switching-latency" or "switching-capacity" of one switch? Is it "packet
forwarding speed" or something else? Thanks again!
Neil
2013/12/9 Norman Geist <norman.geist_at_uni-greifswald.de>
> Maybe a little. There’s lots you can try on the software side of the
> problem, but all this will only try to circumvent the real problem or
> lessen the impact. The most comfortable and likely successful solution, is
> buying another switch. So the keywords are switching-latency and
> switching-capacity. Take the model I posted as a reference, but notice,
> that 16 cores per node is really heavy for 1Gbit/s Ethernet and you might
> want to consider spending some money into a HPC network like Infiniband or
> at least 10Gbit/s Ethernet.
>
>
>
> Norman Geist.
>
>
>
> *Von:* owner-namd-l_at_ks.uiuc.edu [mailto:owner-namd-l_at_ks.uiuc.edu] *Im
> Auftrag von *???
>
> *Gesendet:* Sonntag, 8. Dezember 2013 16:12
> *An:* Norman Geist
> *Cc:* Namd Mailing List
> *Betreff:* Re: namd-l: 50% system CPU usage when parallel running NAMD on
> Rocks cluster
>
>
>
> Thanks for your reply! 16 cores per node are physical, HT was closed
> before NAMD was tested. I'll consider buying a new switch.
>
>
>
> BTW, will it scale better if I compile a UDP version NAMD?
>
>
>
> Neil Zhou
>
> 2013/12/3 Norman Geist <norman.geist_at_uni-greifswald.de>
>
> Your switch is too slow in switching. Try something like the netgear
> gs748t, not that expensive and “ok” scaling. You can temporarily improve
> the situation by trying the tcp congestion control algorithm “highspeed”.
> Set it via sysconfig on all the nodes.
>
>
>
> Additionally, are these 16 cores per node physical or logical (HT). If it
> is HT, leave them out, no speed gain, only more network load.
>
>
>
> Norman Geist.
>
>
>
>
>
>
> ------------------------------
> <http://www.avast.com/>
>
> Diese E-Mail ist frei von Viren und Malware, denn der avast! Antivirus<http://www.avast.com/>Schutz ist aktiv.
>
>
This archive was generated by hypermail 2.1.6 : Wed Dec 31 2014 - 23:21:59 CST